The Adjust-A-Splint uses an innovative design which allows for easy splinting and incorporates movable straps.

With multiple sizes to choose from, the Adjust-A-Splints meet all your splinting needs.

The adjustable splint by iTEC Manufacturing

Key Benefits

Adjustable straps eliminate direct pressure to an injury

Straps are self-gripping and smooth against skin

Contours to patient while maintaining rigidity

Foam padded inside for comfort

Can be used as IV board

Hard plastic outer shell – remains sturdy

Waterproof, closed-cell foam

No need for tape, cravats or air pumps!

Splint molds to patient yet remains rigid along the length.

Padded with 1/2″ thick foam.

Made in the USA

Adding a bend for Ankles and Elbows

To bend splints, cut a triangle out on both sides of the splint where the bend will be made.

Fasten the splint o the patient with straps.

Bend and attach the extra strap above and below the bend to hold in place.

The adjustable splint by iTEC Manufacturing is available in 4 sizes:

12″

18″

24″

36″

Also available in a kit which includes all 4 sizes and a heavy-duty carrying case.

Download the Adjust-A-Splint Flyer

Adjust-A-Splint – $59.95

Size

12″ 18″ 24″ 36″

We can design lifts for any type of cylinders and tanks: gas, oxygen (O2), propane, acetylene, helium, carbon dioxide (CO2,), ethylene, etc.

Welding, Mining, Aviation, Fast Food and other Industries

We can create a variety of custom built lifts to suit your needs. From different sized cylinders to wheelchair lifts, let us know what you need and we will do our best to meet your requirements.

Heavy Duty Lift

This lift was custom designed for a nuclear energy company in order to lift the control box of a nuclear reactor.

This lift is capable of lifting 750 pounds.

The device to be raised is attached to the top via cable and hook.

Wheelchair Lift for Church Stage

This wheelchair lift was designed for a stage at a church.

The person can enter from one side, be lifted up and exit from the other side.

This was also used for people who could not climb stairs, they simply held on to the handrails while being raised.

Ramps are lowered for loading and unloading. While lifting, ramps are raised and held in place with a chain.

Contact iTEC Manufacturing for more information on a customized lift system designed to meet your specific needs.

The Disposable Head Immobilizer comes in three sizes: Adult, Child and Infant / Pediatric.

Here is a complete system for your head immobilization needs. Its design makes it a universal head immobilizer. Each unit includes head and chin straps and is individually packaged in thermo-sealed film.

Are you 100% SATISFIED with your head immobilizer? If not, call us today and set up a FREE TRIAL / Field Evaluation. No strings. No gimmicks. Just enough samples for your crew to adequately evaluate the Multi-Grip. We are confident in our product because it works.

Adult Head Immobilizer (12 pack) – $69.00

Adult Head Immobilizer (20 pack) – $105.00

Child Head Immobilizer (5 pack) – $26.25

Infant Head immobilizer (5 pack) – $26.25

Key Benefits

Straps stay put, unit stays put and patient stays put
Compatible with all C-collars and backboards
Radiolucent
Easy access to the ears
Head strap sticks to board, not to skin/hair (foam covers forehead area)

Non-claustrophobic design
Buoyant for water rescue
Head and chin straps come with each unit
Infant size will fit in a car seat
Can be used with motorcycle/football helmets
Closed-cell foam

Multi-Grip vs Other CID’s

Multi-Grip	Other CID's
Cost effective / disposable	Non-disposables are expensive to replace & require costly cleaners
Simple & ready to use	Some CID's need assembly or have multiple steps before ready
No need to attach to backboards first or reposition which can move patient	Sticky strips: can be placed in wrong position, repositioning compromises adhesive & leaves residue which dirt adheres to Velcro: attracts debris & becomes less effective over time
Works on all backboards, including baskets & scoops	Most CID's will not work on all types of backboards - especially scoops
Waterproof, buoyant	Some CID's lose stability when wet or soiled
Works in a variety of unique & critical situations: motorcycle/race-car/football helmets, infant car seats, etc	Many immobilizers will not work in these important situations
The Multi-Grip's exclusive head strap has strategically placed foam strips - strap sticks to backboard but NOT to patient's hair/skin	Most straps stick to patient's hair, eyebrows and skin which can later cause pain, discomfort and/or allergic reaction to adhesive
100 % latex free	Not all CID's are 100% latex free
Can be written on for quick notation	Unable to write on all CID's

Available Sizes: Adult, Child, Infant

The different sizes allow for access to the ears. *This can vary due to size of patient.

Infant – up to 2 years

Child – 2 to 10 years

Adult – 10 + years

Keep tape from sticking to gloves

Rip liner in the middle, use label to center over patient’s head.

Pull liner from tape while placing head strap in position over cylinder.

Roll cylinder towards patient’s head, push tape under backboard while pulling liner out.

A truss is created which inhibits movement.

Child size.

Infant / pedi size

The Multi-Grip can be used in a car seat with infants.

Works with helmets.

Download the iTEC Manufacturing Multi-Grip Instructions

iTEC Manufacturing’s patient transfer device helps decrease the risk of back injuries during patient transfers while being safe, smooth, simple and performed with speed.

The Bariatric Transfer PAL is excellent for transferring bariatric patients.

The Transfer PAL patient transferring device is specifically designed for transferring patients to and from beds, cots and stretchers.

Benefits:

Multiple use
Slick surface for easy sliding
Staff remain in control of patient during transfer – no risk of patient rolling backward
Loop handles enable staff to utilize a trapeze grip, promoting proper body mechanics
Only 2 straps to secure patient (4 for bariatric)
Fits on stretcher – won’t take up a lot of room
Closed-cell and waterproof for easy clean up
Side release buckles with safety cover – no risk of accidentally unbuckling
Can be used with Kleen Kovers

Fits on stretcher and takes up very little space, will also fit under cushion.

One staff member can easily and safely slide patient from stretcher to bed or vice-versa.

A second staff member can help guide feet, if desired.

Dealing with the patient’s feet.

The Bariatric Transfer PAL

Transfer PAL, Regular and Bariatric

Kleen Kover

The Kleen Kover is a disposable, fluid resistant protective cover for the Transfer PAL.

Benefits:

Disposable
Fluid resistant
Fitted to stay in place
Keeps PAL clean
Cost efficient
Regular or bariatric sizes
Available by the case

Applying Kleen Kover

Unbuckle straps

Slip around bottom

Slightly bend PAL

Slip over top (narrow end)

Tank Boss by iTEC Manufacturing

The Tank Boss is an innovative solution for lifting and moving oxygen cylinders, tanks or bottles. Specifically designed to vertically raise tanks up to 27″, it is ideal for loading tanks into ambulances.

The Tank Boss also features a horizontal lift which raises to 44″.

These two separate lifts make it a breeze to transport, lift and load cylinders into EMS vehicles.

The Tank Boss can also be used for gas cylinders or bottles depending on dimensions. For rugged terrain, we can install pneumatic tires for a slight additional charge.

Benefits

This zero-lift device is simple and effective to use.
Large steering handle for easy maneuverability.
Eliminates back injuries caused from lifting cylinders.
Maintains control of tank at all times.
Slides tank directly into ambulance compartment.
Designed by Rescuers for Rescuers.

Tank Boss – $2295.00

Tank Boss Battery replacement – $179.00

Tank Boss Reconditioned Battery – $89.00

Must send your old battery to our address: 400 Allstar Dr. , Winnsboro, TX 75494

AC Adapter replacement – $24.95

The Original Portable Oxygen Cylinder Lift

The Tank Boss is durable and reliable. Don’t be fooled by systems that are merely for helping load oxygen cylinders. The Tank Boss will do the actual lifting for you!

Why lift when the BOSS can do it for you? The only proven method for preventing back injuries is NOT to lift! Slide the cylinder directly into the vehicle.

Simple and safe operation.” – John P. – MI

Prevents lower back injuries.” – Darren W. – TX

Let the Boss do the lifting! There are two basic types of Tank Bosses, Vertical & Horizontal

A vertical lift for cylinders stored upright in the ambulance and a horizontal lift for cylinders stored horizontally. The horizontal lift can be used to turn tank upright for storage on the ground.

Vertical Tank Boss

Horizontal Tank Boss

Features

Charging

Simply plug adapter into the bottom of the battery to recharge.

Removing Cylinder

You can unhook the safety strap from the unit. Then, either slide around cylinder or place it over the top of cylinder. Then hook back onto unit.

Tank Sizes

The Tank Boss cradle for the vertical combo lift is uniquely designed to fit either an M cylinder or an H cylinder.

New Lease Program

Full benefits and service for one low monthly fee.
For more information, Call Today!

800-892-5562

Tank Boss Dimensions:

Height = 54 1/2″ when lowered

Width = 18″

Length = 32″

Weight = 100 lb (ships as 125 lb w/crate)

Easy to use.” – Hank K. – CT
Effortless lift.” – Doug B. – CA

MADE IN USA
Vertical patent #US7,824,144B2
Horizontal patent #US7,789,611B2

Tank Grip

The iTEC Manufacturing Tank Grip creates a handled grip on the oxygen cylinder which makes it easier to maneuver.

It works especially well with tanks which are stored horizontally on the ambulance.

The Tank Grip makes it easier to hold and move or slide cylinders.

Helps prevent pinched fingers!

On the inside of the strap, there are rubber “gripping” strips which keeps the strap from sliding on the tank.

The safety buckle utilizes a locking cover which prevents accidentally unbuckling.

Get a Grip!

Tank Grip – $19.95